How To Reset Your Home Security System In Tempe

A nice benefit of having your home security system hooked up professionally is that you seldom need to concern yourself with it. With that being said, there may be a couple situations where you need to reset your alarms in Tempe. When using a smart command panel, resetting normally takes one or two tap of a button after a false alarm, power outage, or battery change.

Consult Your Owner’s Manual Before Trying to Reset Your Alarm Panel

Here’s a simple yet valuable tip before you try to reset your Tempe home security system, consult your instruction manual first. You wouldn’t want to damage your home’s protection as a result of touching something incorrectly. Also, control panels might have changed if you switched from a number pad to a digital command hub. Keep in mind that if you can't reset your system, don't hesitate to reach out to the professionals.

Resetting Your Tempe Security System Due To A False Alarm

Typically, a false alarm happens as a result of a sensor that was tripped by accident. You may use the control panel or open your ADT security app and hit the shield icon and type in your credentials to switch off the system when this occurs. You may get a call from your security monitoring team, but just let them know you had a false alarm.

Tips To Reset Your Alarm After A Power Outage In Tempe

If the power goes out because of a storm or other event, you may start to hear a steady beep from your control panel. This lets you know that your home’s defense is running off the backup battery. To reset your equipment and halt the beeping, you need to take steps to disarm and rearm your security.

Keep in mind, if power is out for a longer period of time, you could need a complete reset of your system. Pay careful attention to the directives in the manual -- usually by submitting your code and hitting the designated button two times -- and you should be running fine. You may still hear chirps from the backup power, as it’s possible it won’t cease until your battery is fully charged. Contact your home security specialists if you are still having difficulties with your ADT equipment at least 20 hours after your power is back on.

When You Need To Reset Your Home Security System After Changing A Battery

There will be infrequent times when you will have to switch out a battery powering one of your security devices. In order to accomplish this, you should set your system to "Test Mode" so you don't trigger an alarm by accident. When the you replace the old battery, remove the alarm from test mode and revert back to your usual settings. If the control panel doesn't register the component or the battery light is still on, you might require a whole system reset.

Reset Your Tempe Security System Following The Addition Or Deletion Of A Code

The addition and deletion of people can be completed on your ADT Command interface and the ADT Control mobile app. You should never have to perform a resetting of your system when deleting or adding codes. However, if you find yourself moving to a new home with an existing ADT alarm system, you should contact your home security professional at (480) 608-0064 to start a new service. The installation tech will go on site to replace components, set up other components (if necessary), and perform a full reset.

A Well-Designed Security System Is Only A Call Away

Figuring out how to reset a home security system in Tempe is difficult if it fails to include understandable devices and controls. If the time has come to get your intuitive home protection system, contact (480) 608-0064 or send in the form below. Our specialists are happy to customize the ideal security system for your property.